Skip to content

Neat Support Neat Support

Primary menu

  • neat.no

Search results

  • All platforms
  • Microsoft Teams
  • Zoom Rooms

Known issues on Neat devices are kept up to date in our latest release notes.

To find our latest known issues, navigate to https://support.neat.no/c/manage/updates/, select the most recent release notes, then navigate to the known issues section of the article.

Neat will provide support for Neat devices running current released software version and the previous released software version.

  • By current released software, we mean software available through both ‘stable’ and ‘preview’ channels. Although, please note that the ‘preview’ channel software should be used for testing purposes only and not for wider production use.
  • By prior released software, we mean the last ‘stable’ software release before the current ‘stable’ was promoted.

If you have opted out of ‘Automatic updates’ on your Neat device, you will become responsible for manually upgrading all your Neat devices using the Zoom Room or Microsoft Teams administrator portal.

To ensure you can always get support from Neat’s technical team, please make sure you keep your devices on a supported software release. If you encounter an issue with older software (outside our support policy), when you reach out to us for technical support, we will ask you to upgrade to a supported software release first.

For any questions or concerns, or if you need Neat’s technical team, please email us at support@neat.no.

Neat Bar 2 without Neat Pad (BYOD-only) mode will be supported with the 25.3 software release and will be available for shipping starting June 25, 2025.

Yes it can! The Neat Bar supports a standard called CEC (Consumer Electronics Control), which allows it to send control signals to the screen via the HDMI cable and put the screen to sleep when not in use. Please note that the TV screen will need to have support for CEC. If you enable the ‘Auto wake up’ option (on Neat Pad, go to System Settings -> Display -> Auto wake up), the Neat Bar will automatically wake up the screen when it detects people in the room.

Tap in the open area of the Board’s display (avoiding the controls to launch a meeting, whiteboard, or other function) and a “Settings” button will display in the lower right corner of the screen. The Zoom software version number will be displayed on the “App Version” line of the screen (e.g. “5.5.0”).

To see the Neat firmware version, tap the “System Settings” line below the App Version, and enter the Room’s passcode*. Then navigate to System -> About -> Neat Board serial number and Neat Board firmware version. The Neat firmware version will be displayed in a format like “NFC1.20210213.0020”.

*Note: The room passcode is configured in the Zoom portal. To access it, login to Zoom portal using Administrator’s account and navigate to Room management -> Zoom Rooms-> find your Zoom room and click ‘Edit’ next to its name -> Rooms profile and search for ‘Room Passcode’. By default, this is set to 00000.

To create a recording when using your Neat Bar, you can press the Record button on your Neat Pad. Note that you must be the host of a meeting in order to be able to record it, or have permission to do so from the meeting’s host. When you begin the recording, it will be uploaded to the cloud. Once the meeting is over, a link to your recording will be emailed to you.

Microsoft-level camera controls are now available for the Microsoft Teams Room on Android (MTRoA) software application.

However, you can still use Neat level camera controls from a swipe menu that is available during calls. To access this swipe menu, please do the following:

  1. Swipe with one finger from the right side of the Pad towards the left
  2. A slide out menu will appear with camera control options
  3. Select between group auto framing, individual auto framing, or no auto framing

Note: You can only use this menu to alter your camera settings during an active meeting. Your preferences will not be saved if you are using the swipe menu outside of an active meeting.

 

A whiteboard can be initiated outside of a call by selecting the “Whiteboard” option on the Microsoft Teams homepage, or during a scheduled call by pressing the “Share” icon and selecting to share a whiteboard.

Note: A whiteboard cannot be started from a MTRoA device in a point to point call.

This feature was added to MTRoA devices in the Teams app version 1449/1.0.96.2022120503. To use this feature, please make sure that your device has been fully updated in TAC.

More information about managing Microsoft Teams updates can be found in the following support article: https://support.neat.no/article/managing-updates-on-neat-devices

There are currently a few options to share content in Microsoft Teams:

  • Wired: Connect an HDMI cable from the device you are trying to share from to the content sharing HDMI port on your device. Note: This only supports 1080p30 resolution for content sharing and therefore you should connect a laptop that is capable of supporting this resolution.
  • Wireless: Join the meeting on your personal device and select Share. You can then pick the screen you would like to share. To share audio, select Include Computer Sound option (it’s the switch on the top right of your sharing options).
  • Mobile: Join the meeting from the Microsoft Teams app on your mobile device, and select the ‘Share’ icon found under ‘More Options’

For more information, visit the Microsoft Teams Room support site: Share Content in a meeting on Teams

In order to pair your Bar to your pad in Teams, follow the steps below:

  1.  Follow the initial out of the box instructions on the Neat Pad and Bar. Launch Microsoft Teams in the final step.
  2. Once MTR has launched, follow the on screen instructions to visit Microsoft’s Device Login site and enter the codes shown on both your Bar and Pad.
    Note: The order the codes are entered should not have an affect. You will have to open a new window with the same site after entering the first code.
  3. Once both devices have signed in, a pairing screen will appear on the Pad. Select the Bar you are trying to connect to using the serial number of the device.
  4. Once the Bar you are trying to pair has been selected, a code will on your Bar. Enter this code on the Pad and hit the ‘Pair’ option.
  5. You’re Bar should now be paired with your Pad!

Yes, Neat devices support casting from a Microsoft Teams desktop client to a Microsoft Teams Room.

You will need to have Allow Bluetooth beaconing enabled in your Microsoft Settings. To find these settings, navigate to More (…) > Settings > Meetings and you should find the feature toggle switch.

Bluetooth must also be enabled within the Neat System Settings. To find this setting, navigate to More (…) > Settings > Device Settings > Admin Settings and you should find the Bluetooth toggle switch. Note: To access the Admin Settings you will need the Administrator password, for more information visit Section 4.1.2 in our Microsoft Settings and Neat Settings article.

More information about setting up casting in Microsoft Teams can be found in the following Microsoft support article: https://support.microsoft.com/en-gb/office/cast-content-from-your-desktop-to-a-microsoft-teams-room-6d62cdbb-3da2-4bb9-80bd-9cf1098beb3d

Neat devices do support Proximity Join when on Microsoft Teams.

You will need to have the Allow Bluetooth beaconing and Automatically accept proximity-based meeting invitations enabled in your Microsoft Settings. To find these settings, navigate to More (…) > Settings > Meetings and you should find the feature toggle switches.

Bluetooth must also be enabled within the Neat System Settings. To find this setting, navigate to More (…) > Settings > Device Settings > Admin Settings and you should find the Bluetooth toggle switch. Note: To access the Admin Settings you will need the Administrator password, for more information visit Section 4.1.2 in our Microsoft Settings and Neat Settings article.

 

Microsoft level camera controls are not currently available on Android-based devices. This is a known limitation in the Microsoft Teams Room on Android (MTRoA) software application.

You can still use Neat level camera controls from a swipe menu that is available during calls. To access this swipe menu, please do the following:

  1. Swipe with one finger from the right side of the Pad towards the left
  2. A slide out menu will appear with camera control options
  3. Select between group auto framing, individual auto framing, or no auto framing

Note: You can only use this menu to alter your camera settings during an active meeting. Your preferences will not be saved if you are using the swipe menu outside of an active meeting.

You can also enable or disable Neat camera features outside of an active meeting through your Neat level system settings. To access these settings, please do the following:

  1. Open Device Settings
  2. Enter Admin settings
  3. Open the Audio & video Menu
  4. Select the toggle next “Auto framing” to enable/disable the feature
  5. Select the preferred framing option (Group or Individual) when feature is enabled

Neat Pad uses the same resource account as the MTRoA device in the room. Neat Pad can be used with any Microsoft Teams Room as a Teams Panel device outside of the room. Note: Additional Pads will only be paired at the Microsoft level and will not be able to adjust Neat device settings.

For more information on the pairing process, visit our Understanding Neat and Microsoft Pairing on Neat devices article.

For shared accounts:

  • You can sign out from both devices using the Teams Admin Center if you have the security to do so.
  • You can sign out from both devices in your Neat system settings. From the Settings menu on the Neat Pad, access Device Settings, then navigate to Teams page and select “Teams sign out” (this is password protected). This will sign out both Neat Bar and Neat Pad at the same time.

For both shared and personal accounts:

  • You can connect a USB-C mouse to sign out on your Neat Bar using Microsoft Teams level settings. After connecting the mouse using a USB-C cable, navigate to the Settings menu and select the “Sign out” option.
  • You can sign out from both devices by performing a factory reset on Neat Bar and Neat Pad.

Note: Selecting the option to sign out using Microsoft Teams level settings on Neat Pad will only sign out Neat Pad from your Microsoft Teams account. Your Neat Bar will remain signed on to your account.

Neat devices: Version 20230928 Release Notes

Neat devices: Version 20230928 Release Notes

Last updated on December 4, 2023 If you would like to receive email notifications for new releases, please subscribe here. 1. Introduction This document describes the new features, improvements, bug fixes and known issues in the 20230928 software release for Neat Bar, Neat Bar Pro, Neat Pad, Neat Board, and Neat Frame.  As long as your […]

Neat devices: Version 20230504 Release Notes

Neat devices: Version 20230504 Release Notes

This article more information about the 20230504 firmware update.

Neat devices: Versions 24.5.0 and 24.5.1 Release Notes

Neat devices: Versions 24.5.0 and 24.5.1 Release Notes

This article introduces the new 24.5.0 release for Neat devices.

Neat devices: Version 24.3.0 Release Notes

Neat devices: Version 24.3.0 Release Notes

This article introduces the new 24.3.0 release for Neat devices.

Neat devices: Version 24.6.0 Release Notes

Neat devices: Version 24.6.0 Release Notes

Please find the latest release notes for version 24.6.

Neat devices: Version 24.4.0 Release Notes

Neat devices: Version 24.4.0 Release Notes

This article introduces the new 24.4.0 release for Neat devices

Neat devices: Version 24.2.0 Release Notes

Neat devices: Version 24.2.0 Release Notes

This article contains new features, improvements, bug fixes, and known issues in the 24.2.0 software release for Neat devices

Neat devices: Version 20221128 Release Notes

Last updated on June 22, 2023 If you would like to receive email notifications for new releases, please subscribe here. 1. Introduction This document describes the new features, improvements, bug fixes and known issues in the 20221128 software release for Neat Bar, Neat Bar Pro, Neat Pad, Neat Board, and Neat Frame.  As long as your […]

Neat devices: Version 25.1.0 and 25.1.2 Release Notes

Neat devices: Version 25.1.0 and 25.1.2 Release Notes

Please find the latest release notes for version 25.1.

Neat devices: Version 24.1.0 Release Notes

This article contains new features, improvements, bug fixes, and known issues in the 24.1.0 software release for Neat devices

1 2 3 … 10 Next page

Devices Experiences Spaces Stories

Contact Support Company Partners

Careers Resources Neat as a Service Get newsletter Neat Pulse

Neat Pulse Terms & Conditions Privacy & Cookies Policy Copyright © 2025 Neat

|
International |