Setup – Support
Setup
Neat Bar and Board use ultrasound to detect movement/a change in its surroundings to wake up. For this, the Neat Bar and Neat Board do have an ultrasonic speaker and ultrasonic microphones. As the camera is not used and people are not captured in any way.
No, Neat Bar has one USB-C connection. This does work with a touch screen today, or will work as USB passthrough in the future. These two functions cannot be combined using a (3rd party) USB hub.
Neat Pad uses the same resource account as the MTRoA device in the room. Neat Pad can be used with any Microsoft Teams Room as a Teams Panel device outside of the room. Note: Additional Pads will only be paired at the Microsoft level and will not be able to adjust Neat device settings.
For more information on the pairing process, visit our Understanding Neat and Microsoft Pairing on Neat devices article.
You can just have Group Framing enabled rather than Individual Framing. This is done in our Neat Device Settings under Audio & Video.
For more info, visit our article on Microsoft Teams Settings.
Microsoft level camera controls are not currently available on Android-based devices. This is a known limitation in the Microsoft Teams Room on Android (MTRoA) software application.
You can still use Neat level camera controls from a swipe menu that is available during calls. To access this swipe menu, please do the following:
- Swipe with one finger from the right side of the Pad towards the left
- A slide out menu will appear with camera control options
- Select between group auto framing, individual auto framing, or no auto framing
Note: You can only use this menu to alter your camera settings during an active meeting. Your preferences will not be saved if you are using the swipe menu outside of an active meeting.
You can also enable or disable Neat camera features outside of an active meeting through your Neat level system settings. To access these settings, please do the following:
- Open Device Settings
- Enter Admin settings
- Open the Audio & video Menu
- Select the toggle next “Auto framing” to enable/disable the feature
- Select the preferred framing option (Group or Individual) when feature is enabled
The mounting instructions of Neat Board can be found here: https://neat.no/board/?neat-board-installation-guides=intro.
The mounting instructions of Neat Bar can be found on your Neat Pad during setup. They are also located here: https://neat.no/bar/?neat-bar-installation-guides=intro
Often referred to as Neat Symmetry, Individual auto framing is an innovation that aims to restore visual balance between remote home workers and meeting-room participants.
With Individual auto framing, we can now dynamically frame individuals in the meeting room and join the frames together, eliminating the distance between them. The result is a single frame with multiple meeting participants, all roughly at the same size.
For more details, please read this article about Neat auto framing.
Yes! All Neat devices support Wi-Fi and are compatible with both 2.4 and 5 Ghz networks. Users can choose the Wi-Fi option during the setup process. For more information, please see the article Wi-Fi support on Neat devices.
All Neat devices support Wi-Fi, and are compatible with both 2.4 and 5 Ghz networks. Users can choose the Wi-Fi option during the setup process. For Neat Bar and Neat Pad, the Wi-Fi configuration is done through the Neat Pad during the initial setup and pairing process. For a step-by-step guide on how to configure Wi-Fi on a Bar and Pad, please see the article: How to connect Neat Bar and Neat Pad over Wi-Fi
Yes, certificate based 802.1x connections are currently available as beta functionality in our devices. See here for more info: How to configure 802.1x on Neat Devices
With Neat Board you have a choice of connecting to your network wirelessly or by Ethernet.
Neat Bar and Neat Pad need to be on the same subnet to be able to find each other and pair together. In most cases, pairing problems occur because the Bar and Pad are not connected to the same subnet (and are unable to send/receive multicast packets between each other). For example, if you have connected your Bar to wired network, but Pad on Wi-Fi network, it is possible they are on two different networks in your company.
Please see Neat’s network and firewall requirements guide for further understanding of this topic.
A quick way to find out if you are in the same network is by finding the IP address and subnet mask of both Neat Pad (through the Pad settings) and Neat Bar (press the reset button once at the back of the Bar). If you are not familiar with IP addressing, please reach out to your Network administrator for confirmation, or email Neat’s technical support team at support@neat.no.
Neat Bar can be connected to one or two screens. When connecting to only one TV screen, you must connect the HDMI cable to the HDMI 1 port of the Neat Bar. The HDMI 2 port should be used for the additional screen.
Yes. The Neat Bar ships with a Neat Pad and both will need to be paired together to operate as a complete Zoom Room device.
When installing a Neat Bar with its dedicated Neat Pad, choose the setup: ‘Set up Neat Bar with controller’.
You can also buy additional Neat Pads to work as either extra Zoom Room Controller or Zoom Room Schedular (however, these do not need to be paired with a Neat Bar at the Neat level). If you are using the Neat Pad as an extra controller either for a Neat Bar/Neat Board or a 3rd party Zoom Room system, choose the setup ‘Add a controller’. To use Neat Pad as a Schedular, choose the ‘Add a schedular’ option.
Detailed specifications for Neat Bar and Neat Pad can be found on our website on Neat Bar Specifications.
You can also find more information through the Explore the technology in Neat Bar interactive menu.
Detailed specifications for Neat Pad can be found on our website on Neat Pad Specifications.
You can also find more information through the Explore the technology interactive menu.
Detailed specifications for Neat Board can be found on our website on Neat Board Specifications.
You can also find more information through the Explore the technology in Neat Board interactive menu.
Support, warranty & returns
Neat will provide support for Neat devices running current released software version and the previous released software version.
- By current released software, we mean software available through both ‘stable’ and ‘preview’ channels. Although, please note that the ‘preview’ channel software should be used for testing purposes only and not for wider production use.
- By prior released software, we mean the last ‘stable’ software release before the current ‘stable’ was promoted.
If you have opted out of ‘Automatic updates’ on your Neat device, you will become responsible for manually upgrading all your Neat devices using the Zoom Room or Microsoft Teams administrator portal.
To ensure you can always get support from Neat’s technical team, please make sure you keep your devices on a supported software release. If you encounter an issue with older software (outside our support policy), when you reach out to us for technical support, we will ask you to upgrade to a supported software release first.
For any questions or concerns, or if you need Neat’s technical team, please email us at support@neat.no.
Neat devices are sold with a 1-year warranty included. We also offer additional 1 or 2 year extended warranties at the time of purchase. Extended warranty prices are listed on neat.no.
View our complete warranty statement here.
You have a full 30 days to try out any Neat product risk-free. If you love it, keep it. If it’s not the right fit, we’ll gladly accept your return and credit you for the full amount of your order, including shipping upon receipt of the returned unit at our warehouse. For more information on Neat’s purchasing or return policies, email orders@neat.no.
Try Neat Bar and Neat Pad risk free for 30 days. If you love it, keep it. If it’s not the right fit, we’ll gladly accept your return and credit you for the full amount of your order, including standard ground shipping upon receipt of the returned unit at our warehouse. For more information on Neat Bar and Neat Pad purchasing or return policy, email orders@neat.no.
We want you to be satisfied with your purchase of Neat Board. If for some reason it’s not the right fit, just return it within 30 days of purchase. Neat will gladly accept your return and credit you the amount of your order minus a restocking fee of US$ 1000 which covers packing, transportation, and handling. For more information on Neat Board purchasing or return policy, email orders@neat.no