How to enable Neat Pad’s microphones

Find out how to enable Neat Pad's microphones!

How to set up 802.1x using SCEP on Neat devices (Beta)

SCEP stands for Simple Certificate Enrollment Protocol and is a certificate management protocol that allows for automatic certification issuing in a scalable way.

Managing updates on Neat devices

Last updated on October 24, 2023. Introduction This article describes how Neat firmware and other software application updates are managed on Neat devices. Throughout this article, the term “firmware” will refer to the code produced and distributed by Neat which controls underlying hardware performance (cameras/microphones/speakers/screens/etc), and the term “software” or “apps” will refer to the […]

Proximity Join – User guide on how to join a Zoom Room from the Zoom app

This user guide explains how to join a meeting on a Zoom Room device from the Zoom app. Use this when you're near an available Neat device where the meeting is not booked.

Neat Pad – Scheduler user guide for Zoom

This user guide explains how to operate Neat Pad as a Scheduler.

Neat Pad – Controller user guide for zoom

This user guide explains how to operate Neat Pad as a controller on Zoom.

Neat Pad – Controller quick start guide for Zoom

This user guide explains how to operate Neat Pad as a Controller to join and control meetings on Zoom.

Tips and tricks for Zoom Direct Guest Join into Microsoft

In June 2022, Zoom introduced the Direct guest Join (DGJ) into Microsoft Teams. This allows you to join a Microsoft Teams meeting straight from the Zoom Room on an Android appliance. This does not need any other licenses or cables. Just forward the meeting to the room account and then click Join Meeting. The method […]

Multi-Stream and Auto-framing with Multi-focus framing features

In our 20210817 release, Neat team brings a new experience called 'Multi-Stream' in partnership with Zoom. Find out more!

How to set up a Neat Bar

Need some help in setting up your Neat Bar for the first time? This article provides step-by-step instructions on how to setup a Neat Bar and Neat Pad out of the box.

How to set up a Neat Bar Pro

Need some help in setting up your Neat Bar Pro for the first time? This article provides step-by-step instructions on how to setup a Neat Bar Pro and Neat Pad out of the box.

How to configure auto framing: Framing Boundary

Last updated on January 26 2023 Introduction Auto framing feature allows Neat devices to optimally frame all participants in the meeting room and provide the best viewing experience for the far-end participants. It works without user intervention and can be enabled/disabled both during a call and outside of a call. However, in certain rooms with […]

How to setup Neat Sense

This guide takes you through the step-by-step process to enable Neat Sense in your environment.

How to setup Neat Pad as a Controller for Neat Board and other Zoom Rooms

Learn how to configure the Neat Pad as a Zoom Room controller for 3rd party Zoom Rooms.

Using Neat Pad as a Scheduling Display for Zoom Rooms

Find out how to configure the Neat Pad as a Zoom Room Scheduling Display.

How to connect Neat Bar and Neat Pad over Wi-Fi

This article provides a step-by-step guide on how to connect a Neat Bar and Neat Pad to a Wi-Fi network and pair them together.

How to Enable Remote Access on Neat Devices

Remote Access allows administrators to view Neat's system information, download logs, upload certificates etc. Read this article to find out more.

How to factory reset a Neat device

In certain situations, Neat team may advise you to factory reset your Neat device and go through the setup process again. This article provides instructions on how to factory reset your Neat device.